Dish Network Platinum PVR Remote Control User Manual page 11

text_dishpvr.fm Page 9 Thursday, July 12, 2001 10:02 AM
Switch Between TV and Device Volume Control
To set the remote to control the device's volume:
1. Press and hold the Aux mode button
for three seconds, and then let go of it.
2. Press the Pound (#) button.
3. Press the plus (+) side of the Volume
button.
4. Press the 0 number button.
5. Press the Pound (#) button.
The AUX mode button flashes three times.
To set the remote back to control the TV volume:
1. Press and hold the TV mode button
for three seconds, and then let go of it.
2. Press the Pound (#) button.
3. Press the plus (+) side of the Volume
button.
4. Press the 0 number button.
5. Press the Pound (#) button.
The Aux mode button flashes
three times.
108933 9