Page 2
Turn On Your Remote Remove the PULL tab on the back of your remote control Press SYSTEM INFO on your receiver The appearance and location of the SYSTEM INFO button varies from receiver to receiver This button is located behind a door on the front of some receivers Press SAT and then RECORD on your remote...
Page 3
Pair Your Remote Press and hold the device button you want to program until all four device buttons light up Press and hold TV to pair with your TV DVD or AUX to pair with any other device Enter the three-digit code for your device while the device buttons are lit up See Device Codes in this guide Press #...
Page 4
Explore Your Remote Device Power Turn your DISH receiver– or another device you are controlling–on or o Input Change your TV’s input when in TV mode Menu Access your receiver’s features and settings Recall Return to the last channel you were watching Info Get more information about the program...
Page 5
Device Buttons Change the device you want to control: SAT (your DISH receiver), TV, Blu-ray/DVD player, or auxiliary device Page Up & Down Page through menus such as the Guide TV Power Turn your TV on or o Cancel Go back one menu View Live TV Return to the program you are watching...
Regulatory Information This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, 2. This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Need Help? mydish.com/support/products/remotes/20x 1.800.333.DISH (3474) Warranty, safety, regulatory, and legal information can be found at mydish.com/support/remotes DN011584...