Cleaning The Group; Gasket And Screen Installation - Quick MILL Andreja Premium Owner's Manual

Gasket and Screen Removal - Continued
 Method 2
If the gasket and screen will not come out using
the previous method then you will need a scratch
awl or ice pick to remove them.
Using the scratch awl or ice pick, deeply pierce
the gasket and then pry it down. If the gasket is
old and dried out then it will be more difficult to
remove and will come out in pieces. Repeat until
all remnants of the old gasket are removed.

Cleaning The Group

 Before installing the new gasket and screen it is very important to clean the group head.
Make up a solution of hot water and backflushing cleanser. Using the provided cleaning
brush and cleanser, clean the group head and be sure the groove that the gasket sits in
is completely free of any residual gasket material and coffee grounds or the new gasket
will not seat properly.

Gasket And Screen Installation

 Step 1
With the writing or beveled side of the gasket
facing up insert the screen into the gasket
as shown to the right. It is also recommended
to use a little bit of food grade lubricant around
the perimeter of the gasket to make installation
easier.
Andreja Premium Espresso Machine
17