Group Gasket And Shower Screen Replacement; Gasket And Screen Removal - Quick MILL Andreja Premium Owner's Manual

Hide thumbs Also See for Andreja Premium:

Table of Contents

Maintenance – Continued

Group Gasket And Shower Screen Replacement



The group gasket is a black rubber gasket that makes the seal between the portafilter

and the group head. We recommend replacing the gasket on a yearly basis. The

Andreja uses an E61 8.5mm gasket. They can be purchased from our website at the

link below.

http://www.chriscoffee.com/products/home/e61groupparts/e61groupgasket



Replacing the group gasket requires the removal of the shower screen as well so we

also recommend replacing the shower screen at the same time. The E61 shower screen

can be purchased from our website at the link below.

http://www.chriscoffee.com/products/home/e61groupparts/faemae61groupscreen



Before replacing the group gasket and shower screen the machine should be turned off

and cooled down so that the grouphead is cool to the touch.



There are two ways to remove the group gasket and shower screen depending on how

old they are. If you replace the gasket yearly then the first method shown is

recommended. If the gasket is older and dried out then the second method shown will

be necessary.

 Method 1

In the picture to the right shows an indent that

goes around the perimeter of the screen.

Insert either a flat blade screwdriver or a spoon

into the indent and then carefully pry the gasket

and screen down. You may have to do this on a

few spots to remove them.

Andreja Premium Espresso Machine

Table of Contents

Show Quick Links

Table of Contents