Cleaning The Machine; Repairs And Maintenance; Storage And Disposal - Quick MILL 04005 Operating Instructions Manual

4. Use one scoop of coffee for the single cup filter and two scoops for the two cup filter.
5. Press the coffee with the tamper for that purpose (18).
6. Insert the filter holder in the dispensing unit seat (12).
7. Depending on the filter used, place one or two cups under the filter holder (14).
8. Press the coffee switch (4) and then turn it off when the desired amount of coffee has been dispensed.
7. STEAM DISPENSING (CAPPUCCINO)
1. Turn on the rear switch (see Fig. 2), which activates the steam exchanger.
2. Indicator light 7 lights up.
3. Wait for indicator light 7 to go off.
4. Position the wand over the tray, activate switch 3 and discharge it into the tray; turn off switch 3 and put the
wand in the beverage to be heated.
5. Reactivate steam switch 3; when the beverage has reached the desired temperature and amount of foam,
turn off the steam switch.
6. After heating the beverage, discharge a bit of steam from the pipe to clean the nozzle holes.
7. Clean the steam wand with a sponge.

8. CLEANING THE MACHINE

Before cleaning, repairing or performing maintenance on the coffee machine, unplug it from the power outlet and
wait for it to cool.
To clean do not use metal or abrasive tools like steel wool, metal brushes, needles, etc. and detergents, but use
a damp cloth or sponge.
Clean the body, the steam pipe (8), the spray head and the group gasket of the unit.
Check and clean the drip tray, if necessary.
Rinse the filters and the filter holder with hot water and a cloth or sponge.
Clean the water tank (10), being careful to replace the rubber tube with the filter until it touches the bottom of the
tank.

8.1 REPAIRS AND MAINTENANCE

Do not open the machine; in case of defects involving repairs or maintenance, only contact a Service Centre
authorised by QUICK MILL.
The manufacturer declines all responsibility for improper interventions.

9. STORAGE AND DISPOSAL

In case of long periods of inactivity, unplug the coffee machine from the power outlet; it should be protected from
atmospheric agents (dust, dirt, etc.) and stored in safe places that are not accessible to children.
If you decide not to use the coffee machine any longer, we recommend making it unusable by cutting off its
power cord after having unplugged it from the power outlet.
10. POSSIBLE PROBLEMS
If the power cord is damaged, contact an authorised service centre to have it replaced since it requires
the use of a special tool.
Waste materials used for processing or maintenance, if they are not biodegradable or are polluting, should be
put in separate containers and delivered to the appropriate collection centres.
Checks that can be carried out by the user after having disconnected the electric power supply.
A) The machine does not turn on:
- Make sure that it is plugged in;
- Make sure that the mains current is present and that the cut-out or main switch is connected;
- Check the condition of the plug and of the power cord; have them replaced by qualified personnel if they are
damaged.
- Check the fuses in the machine's socket.
13