Note:
4.11 Firmware Update
This function allows updating POE-1200/2400 firmware, as showed in Figure 4-12.
To update firmware, you need a DHCP server and a well configured TFTP server in the
same subnet with POE-1200/2400. The console interface will show processing message
during update and reboot after complete. Please check carefully in console and do NOT
shut down POE-1200/2400 before update complete.
Default Setting will change all ports to default PoE
abled , all port priority to default 0 , IP address to default
192.168.0.100 , and password to default admin .
Figure 4-12 Firmware Update
En-
25