Chapter 3 Console Configuration; Connect To Pc's Rs-232 Serial Port - Planet POE-1200 User Manual

Unlike the one-port 802.3af Power over Ethernet power injector, the POE-1200/POE-2400
performs series smart functions that make the Injector operate more effectively. This
Chapter describes the common usage of the Injector's Smart Configuration.
When you are ready to configure the smart functions of the Switch, make sure you had
connected the supplied RS-232 serial cable to the RS-232 port at the front panel of your
POE-1200/2400 Switch and your PC.

3.1 Connect to PC's RS-232 serial port

Hyper Terminal
In Windows 98/2000/XP, launch HyperTerminal , create a new connection, and adjust
settings as below:
• Baud per second: 9600
• Data bits: 8
• Parity: None
• Stop bits: 1
• Flow Control: None
Once the terminal has connected to the device, power on the POE-1200/2400, the
terminal will display that it is running testing procedures. After boot, the following screen
displayed.
CONSOLE CONFIGURATION
Chapter 3
9