Zavio D5110 User Manual
  1. Manuals
  2. Brands
  3. Zavio Manuals
  4. IP Camera
  5. D5110
  6. User manual

Zavio D5110 User Manual

Hide thumbs Also See for D5110:
Table of Contents

Advertisement

Quick Links

D5110/D5111/D7110 User Manual
D5110 / D5111 / D7110
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the D5110 and is the answer not in the manual?

Questions and answers

Related Manuals for Zavio D5110

Summary of Contents for Zavio D5110

  • Page 1 D5110/D5111/D7110 User Manual D5110 / D5111 / D7110...

  • Page 2: Table Of Contents

    D5110/D5111/D7110 User Manual Contents CHAPTER 1. SAFETY INSTRUCTION ........................1 CHAPTER 2. MINIMUM SYSTEM REQUIREMENT & ................... 3 PRODUCT FEATURE ..............................3 2.1 S ............................3 YSTEM EQUIREMENT 2.2 P ............................... 4 RODUCT EATURES CHAPTER 3. USING IP CAMERA VIA WEB BROWSER ..................5 3.1 W...
  • Page 3 D5110/D5111/D7110 User Manual 7.2.1 General ................................48 7.2.2 Alarm sending ..............................50 7.2.3 Periodical sending ............................51 7.3 N .............................. 53 ETWORK STORAGE 8.3.1 General ................................53 7.3.2 Alarm sending ..............................54 7.3.3 Periodical recording ............................55 7.4 HTTP E .................................

  • Page 4: Chapter 1. Safety Instruction

    D5110/D5111/D7110 User Manual User Manual Chapter 1. Safety Instruction  Before you use this product This product has been designed with safety in mind. However, the electrical products can cause fires which may lead to serious body injury if not used properly. To avoid such accidents, be sure to heed the following.
  • Page 5 D5110/D5111/D7110 User Manual  In case of abnormal operation • If the unit emits smoke or an unusual smell, • If water or other foreign objects enter the cabinet, or • If you drop the unit or damage the cabinet:1 Disconnect the cable and the connecting cables. 2 Contact your authorized dealer or the store where you purchased the product.

  • Page 6: Chapter 2. Minimum System Requirement

    D5110/D5111/D7110 User Manual Chapter 2. Minimum System Requirement & Product Feature 2.1 System Requirement For normal operation and viewing of the network camera, it’s recommended that your system meet these minimum requirements for proper operation: Item Requirements Pentium 4, 2.8GHz (or equivalent AMD)

  • Page 7: Product Features

    Up to 10 users Connection -30 ~ 50 ℃ (-22 ~ 122 ℉) D7110 Operating conditions 0 ~ 50 ℃ (22 ~ 122 ℉) D5110/D5111 HARDWARE F1.5, 4.0mm Megapixel board lens (D5110) Lens F1.2, 2.7-9mm 14 φ board lens ( D5111/D7110) 8 φ...

  • Page 8: Chapter 3. Using Ip Camera Via Web Browser

    D5110/D5111/D7110 User Manual Chapter 3. Using IP Camera via Web Browser 3.1 Windows Web Browser 1. Open your web browser, and enter the IP address or host name of the IP camera in the Location / Address field of your browser.

  • Page 9: Mac Web Browser

    D5110/D5111/D7110 User Manual 3.2 Mac Web Browser 1. Click the Safari icon, and enter the IP address of the IP camera in the Location / Address field of your browser. Note : If you only want to view the video without Setting screen “http://<IP>/index2.htm”...
  • Page 10 D5110/D5111/D7110 User Manual 3. The monitor image will be displayed in your browser. In the far left side of main configuration are Setting, Client Setting, and Image Setup.

  • Page 11: Chapter 4. Operating Ip Camera Via Mobile Phone

    D5110/D5111/D7110 User Manual Chapter 4. Operating IP Camera via Mobile Phone 4.1 Mobile Phone Viewing 4.1.1 3G Mobile Phone Streaming Viewing For 3G mobile phone viewing, type “ rtsp://<IP>:<PORT>/video.3gp ” into your 3G Streaming Link. <IP> is the Public IP address of your IP camera; <PORT> is the RTSP port of your IP camera (Default value is 554.) Example: rtsp://100.10.10.1:554/video.3gp...

  • Page 12: Using Ip Camera Via Iphone

    D5110/D5111/D7110 User Manual 4.2 Using IP Camera via iPhone You can use ZAVIO Web User Interface via iPhone. Please follow the setting process below. Then you can use ZAVIO Web UI via iPhone. 2. Type IP address in your web link.

  • Page 13: Chapter 5. Configuration Of Main Menu

    D5110/D5111/D7110 User Manual Chapter 5. Configuration of Main Menu In the left side of main configuration are Setting, Client setting, Image setting. In the right side, you can control Live View in your main Browser. The functions include Snapshot, Open digital zoom, Audio, and Video Play.

  • Page 14: Live View

    D5110/D5111/D7110 User Manual 5.1 Live View 5.1.1 Snapshot You can capture a still image shot by clicking the camera icon and save it in the operating computer. Symbols Meaning a snapshot window appears after clicking the icon Save save the picture captured by snapshot into your computer computer computer.

  • Page 15: Video Play Buttons

    D5110/D5111/D7110 User Manual 5.1.3 Video play buttons Symbols Meaning Pause the current video Play the video Stop the current video Record the current video Note: Concerning the recording storage requirement of your h ard d isk, p lease r efer t o the CHAPTER 10.

  • Page 16: Setting

    D5110/D5111/D7110 User Manual 5.2 Setting This function is only for the Administrator. Click “Setting” on the home page of web user interface to get into the Basic and Advanced settings menu. Click Basic folder, there are sub-folders including System, Camera, Network, and Security.

  • Page 17: Client Setting

    D5110/D5111/D7110 User Manual 5.3 Client Setting This function is only for the client. Click this button to control Mode, View Size, Protocol, and Video Buffer. 5.3.1 Mode Click the pull-down box to choose video compression mode of LIVE VIEW among H.264, MPEG-4, and MJPEG.

  • Page 18: Image Setup

    D5110/D5111/D7110 User Manual 5.4 Image Setup The tool bar can be adjusted to optimize video Brightness, Contrast, Saturation and Sharpness. 5.4.1 Brightness The value range is 0~99. The higher value the brightness is, the brighter the image is. 5.4.2 Contrast The value range is 0~99.

  • Page 19: Chapter 6. Setting-Basic

    D5110/D5111/D7110 User Manual Chapter 6. Setting-Basic Click the Basic folder to display the sub folders including System, Camera, Network, and Security. 6.1 System Click the folder of System to display the sub-folders including Information, Date / Time, Initialize, and Language.

  • Page 20: Date / Time

    D5110/D5111/D7110 User Manual 6.1.2 Date / Time The Date/ Time screen displays all options of time setting.  Current date / time: This displays the current date and time of this IP Camera.  PC clock: This displays the date and time of the monitoring PC clock.

  • Page 21: Initialize

    D5110/D5111/D7110 User Manual as the NTP server.  Time Zone: Select the Time Zone format of Greenwich Mean Time among different cities. The time display will be the same as the current date / time option.  Daylight Saving Time: There are two modes to choose for setting up daylight saving time.

  • Page 22: Language

    D5110/D5111/D7110 User Manual  Backup Setting: You can save the setting data of this IP Camera into a file. Click “Save” and follow the instructions on the browser to save the setting data file to the location you specified.  Restore Setting: Download the saved setting data of this IP Camera. Click “Browse” and select saved file.

  • Page 23: Camera

    D5110/D5111/D7110 User Manual 6.2 Camera Click the folder of Camera to display the sub folders including General, H.264, MPEG-4, MJPEG, 3GPP, Advanced, and Playback. 6.2.1 Camera 7.2.1 General  RTSP: The default value is 554. If the IP Cameras connected with router and installed outside are over 2 sets and all of them need support RTSP, please fill some value in the blank space in the range from 1024 to 65535.
  • Page 24 D5110/D5111/D7110 User Manual from IP Camera. And you can choose the bit rate from 4.75k to 12.2k. However, the usage of this codec will cause frame-rate decreasing. Off: Select Off, audio file won’t be transmitted by IP Camera.  ...

  • Page 25: H.264

    D5110/D5111/D7110 User Manual Threshold: Threshold value can be set according to applied environment. The default  value of dark is 95 which means ICR and IR will switch to night mode when the environment is5lux. On the other hand, the default value of bright is 80 which means ICR and IR will switch to day mode the environment is 20 Lux.
  • Page 26 D5110/D5111/D7110 User Manual 1024 to 65535. Time to Live: Set the maximum TTL that multicast can pass through.  Note: Time To Live option determines the maximum length of time (measure as the number of network routers that can be passed before data arrives at its destination or is dropped) within which a multicast packet must reach its destination.

  • Page 27: Mpeg-4

    D5110/D5111/D7110 User Manual 6.2.3 MPEG-4  Viewer authentication: On: If the viewer authentication is On, the users will be requested to key-in username  and password when using QuickTime Player to have live viewing. Off: If the viewer authentication is Off, you can have live viewing on computer by ...

  • Page 28: Mjpeg

    D5110/D5111/D7110 User Manual same time.  Quality: Auto: The quality and bitrate will be adjusted automatically according to the frame  rate. Fixed Quality: Select the value of quality among Medium, Good, Delicate and  Excellent. Fixed Bitrate: Set the bitrate of MPEG-4 image transmission for a line. You can select ...

  • Page 29: 3Gpp

    D5110/D5111/D7110 User Manual On: If the viewer authentication is On, the users will be requested to key-in username  and password when using QuickTime Player to have live viewing. Off: If the viewer authentication is Off, you can have live viewing on computer by ...

  • Page 30: Advanced

    D5110/D5111/D7110 User Manual  Viewer authentication: On: If the viewer authentication is On, the users will be requested to key-in username  and password when using QuickTime Player to have live viewing. Off: If the viewer authentication is Off, you can have live viewing on computer by ...
  • Page 31 D5110/D5111/D7110 User Manual  White Balance: Choose the white balance among Auto, Florescent, Incandescent and Black & White.  Lighting: The default setting of lighting environment is Auto. However, you may also choose 50 or 60 Hz upon the lighting environment of your country.

  • Page 32: Playback

    D5110/D5111/D7110 User Manual choose Auto and Calibrate. Please click OK at the bottom of this page after calibrating. Open: Choose Open to enable maximum aperture. The default setting is open.  Calibrate: Click Calibrate to adjust auto Iris lens. The whole process will continue ...

  • Page 33: Network

    D5110/D5111/D7110 User Manual 6.3 Network Click the folder of Network to display the sub folders including Information, PPPoE, DDNS, UPnP, Bonjour, IP Notification, Wireless and Messenger. 6.3.1 Information Display the MAC address of the device.  Obtain an IP address automatically (DHCP): If a DHCP server is installed on the network, to select this while the IP address is assigned by the DHCP server.

  • Page 34: Pppoe

    D5110/D5111/D7110 User Manual Use the following IP address: Select this option when the fixed IP address is set. IP address: Enter the IP address of the device.  Subnet mask: Enter the subnet mask.  Default gateway: Enter the default gateway.
  • Page 35 D5110/D5111/D7110 User Manual  IP address: The IP address obtained at the PPPoE connecting with network.  User ID: Enter the user ID for authentication necessary for PPPoE connections. Type it up to 64 characters.  Password: Enter the password for authentication necessary for PPPoE connections. Type it up to 32 characters.

  • Page 36: Ddns (Dynamic Dns)

    D5110/D5111/D7110 User Manual 6.3.3 DDNS (Dynamic DNS) DDNS is a system which allows the domain name data held in a name server to be updated in real time. The most common use for DDNS is allowing an internet domain name to be assigned to a computer with a varying / dynamic IP Address.
  • Page 37 D5110/D5111/D7110 User Manual You can apply DDNS Note : How to apply DDNS username and Host name?? username and Host name by the following steps: 1. Login http://www.dyndns.org, click the Creat Account 2. Input all information and follow step by step with...
  • Page 38 D5110/D5111/D7110 User Manual 3. Login with new account and click Account → My Hosts → Add Host Services 4. Type domain in the Hostname field and select sub-domain...
  • Page 39 D5110/D5111/D7110 User Manual 5. After type information, check your DDNS service. 6. Type your DDNS User ID, Password and Host name in Setting → Network → DDNS. After completing setting, reboot IP Camera.

  • Page 40: Upnp (Universal Plug And Play)

    D5110/D5111/D7110 User Manual 6.3.4 UPnP (Universal Plug and Play) If you have a Router to access to internet and the Router supports UPnP IGD function, you need to turn on the UPnP Port Forwarding function.  HTTP port: Enter the HTTP port number and default HTTP port is 80.

  • Page 41: Bonjour

    D5110/D5111/D7110 User Manual 6.3.5 Bonjour Bonjour, also known as zero-configuration networking, enables automatic discovery of computers, devices, and services on IP networks. Bonjour uses industry standard IP protocols to allow devices to automatically discover each other without the need to enter IP addresses or configure DNS servers.
  • Page 42 D5110/D5111/D7110 User Manual  Notify Type: You can select the notify type among DHCP, Static IP, and PPPoE.  SMTP Server Name: Type the SMTP server name up to 64 characters, or the IP address of the SMTP server.  SMTP Server Port: You can set port number from 1~65535 according to your mail server.

  • Page 43: Security

    D5110/D5111/D7110 User Manual User name, Password: Type the user name and Password of the user who has the  mail account. This setting is necessary when the SMTP server which sends e-mails performs authentication.  Recipient e-mail address: Type the recipient e-Mail address up to 64 characters. You can specify up to three recipient E-mail addresses.
  • Page 44 D5110/D5111/D7110 User Manual  Re-type Password: Re-type the password to confirm.  Viewer Mode: Set the user mode among Admin, Operator, and Viewer. Different viewer mode has different limits of authority. The Admin mode has all authority of configuration. ...

  • Page 45: Https

    D5110/D5111/D7110 User Manual 6.4.2 HTTPS HTTPS is a URL scheme used to indicate a secure HTTP connection. It is syntactically identical to the http:// scheme normally used for accessing resources using HTTP. Using an https: //URL/ with a different default TCP port (443) and an additional encryption / authentication layer between the HTTP and TCP.

  • Page 46: Ip Filter

    D5110/D5111/D7110 User Manual 6.4.3 IP Filter IP Filter provides the function of controlling the range of IP address, similar with firewall service.  IP filter: Select if you would like to have IP filter function.  Allow range: The default range is from 0.0.0.0 to 255.255.255.255. Enter the “Start IP address”...

  • Page 47: Chapter 7. Setting-Advanced

    D5110/D5111/D7110 User Manual Chapter 7. Setting-Advanced Click the folder of Advanced to display the sub folders including FTP client, SMTP, Network storage, HTTP event, Alarm output, Schedule, Alarm input, Alarm buffer, Motion detection, Audio detection, and System Log. 7.1 FTP Client Use this menu to set up for capturing and sending a image or video clip to an FTP server.

  • Page 48: Alarm Sending

    D5110/D5111/D7110 User Manual  Password: Type the password for the FTP server.  Retype password: To confirm the password, type the same characters as you typed in the Password box.  Passive mode: Set whether you use the passive mode of FTP server or not when connecting to FTP server.
  • Page 49 D5110/D5111/D7110 User Manual  Suffix: Select a suffix to add to the file name Date & time: The date & time suffix is added to the Image file name. The date/time  suffix consists of lower two-digits of year (2 digits), month (2 digits), date (2 digits), hour (2 digits), minute (2 digits), second (2 digits), and consecutive number (2 digits), thus 14-digit number is added to the file name.

  • Page 50: Periodical Sending

    D5110/D5111/D7110 User Manual 7.1.3 Periodical sending Select On, you can set to send an image file to FTP server periodically.  Remote path: Remote path: Type the path to storage location of FTP server which you have authorized.  Image file name: Type the file name of snapshot or video clip sent by SMTP up to 10 alphanumeric characters, - (hyphen) and _ (under score).

  • Page 51: Smtp

    D5110/D5111/D7110 User Manual 7.2 SMTP Set the SMTP menu when you want to send an image or video clip via e-mail. By using Mail (SMTP) function, you can send a mail with attached file which has been shot linked with the external sensor input or with the built-in motion detection function. The file can also be sent periodically.
  • Page 52 D5110/D5111/D7110 User Manual Note: If you use g-mail as your mail server, you should set 25 as your port number and tick SSL box.  Authentication: Select the authentication required when you send an email. Off: Select if no authentication is necessary when an email is sent.

  • Page 53: Alarm Sending

    D5110/D5111/D7110 User Manual 7.2.2 Alarm sending Set to send the mail with connection to the alarm detection by the external sensor input or by the built-in motion detection function. Select On to send the image file to SMTP server linked with the alarm detection.

  • Page 54: Periodical Sending

    D5110/D5111/D7110 User Manual  Alarm Motion Detection: Click it on for using Motion Detection function as a sensor. You  can set motion detection function at the motion detection function screen. Note: You can set motion detection at motion detection screen. (Please go “Setting →...
  • Page 55 D5110/D5111/D7110 User Manual  Image file name: Type the file name of the image sent by SMTP up to 10 alphanumeric characters, - (hyphen) and _ (under score).  Suffix: Select a suffix to be added to the file name sent by SMTP.

  • Page 56: Network Storage

    D5110/D5111/D7110 User Manual 7.3 Network storage Network storage provides the storage function for saving image files to the specified computer and folder connected with the operating computer. 8.3.1 General Select On if you would like to use the network storage function. Then choose one protocol between Windows network (SMB/CIFS) and Unix network (NFS).

  • Page 57: Alarm Sending

    D5110/D5111/D7110 User Manual Test: After setting the network storage location information, you can tick the test key  to test if the connection between IP CAM and network storage location works. If the recording video file is assigned to be stored in a low-speed device (ex.

  • Page 58: Periodical Recording

    D5110/D5111/D7110 User Manual Note: You can set motion detection at motion detection screen. (Please go “Setting → Advanced → Motion detection → Setting”) For more details, you can check Chapter 8.9. Audio detection: Click it on for using Audio detection function as a sensor. You can ...
  • Page 59 D5110/D5111/D7110 User Manual You can set up to transmit image files to the network storage location periodically by selecting On.  Image file name: Type the file name you want to assign to the file transmitted to the network storage location. You can use up to 10 alphanumeric, - (hyphen) and _ (underscore) for naming.

  • Page 60: Http Event

    D5110/D5111/D7110 User Manual 7.4 HTTP Event Set up this menu for sending commands to an HTTP server. By using HTTP client function, you can send the command defined by yourself, linked with the external sensor input or with the built-in motion detection function to HTTP server. HTTP client setting menu is composed of two tabs, General and Alarm sending.

  • Page 61: Alarm Sending

    D5110/D5111/D7110 User Manual 7.4.2 Alarm sending Set to send the command with connection to the alarm detection by the external sensor input or by the built-in motion detection function. Select “On“ to send the image and audio file to HTTP server linked with the alarm detection.
  • Page 62 D5110/D5111/D7110 User Manual Audio Detection: Click it on for using Audio detection function as a sensor. You can  set audio detection function at the audio detection function screen. Note: You can set audio detection at audio detection screen. (Please go “Setting →...
  • Page 63 D5110/D5111/D7110 User Manual Parameter: the parameter of CGI (defined in URL of HTTP → General) is  from your target device. For example, move=down. Message: message will show up in the form of Message = PTZ down. If your ...

  • Page 64: Alarm Output

    D5110/D5111/D7110 User Manual 7.5 Alarm Output You can set Alarm Output function in this menu to control the alarm out of I / O port on the rear of the device linked to the alarm detection and the timer.  Alarm Output: To activate the Alarm output function, select On. If not, select Off.
  • Page 65 D5110/D5111/D7110 User Manual . (Please go “Setting → Advanced screen Note: You can set alarm buffer at alarm buffer → Alarm Buffer → Setting”) Alarm Input: Select the connected alarm. Sensor Input: The external sensor which is connected to sensor input1 of the alarm input.

  • Page 66: Schedule

    D5110/D5111/D7110 User Manual 7.6 Schedule Click Schedule on the Advanced mode menu, the Schedule setting menu appears. This is the same menu as the setting menu which is displayed when you click Schedule to set Effective period and Schedule in FTP client, e-Mail (SMTP), HTTP event, Record, and Alarm out setting menu setting menu.

  • Page 67: Alarm Input

    D5110/D5111/D7110 User Manual 7.7 Alarm Input When you click Alarm Input on the Advanced mode menu, the Alarm Input setting menu appears. You can set in this menu to control the external alarm input of I / O port on the rear of the device linked to FTP, SMTP, HTTP Sending Function, and Network Storage.

  • Page 68: 878 Alarm Buffer

    D5110/D5111/D7110 User Manual 878 Alarm Buffer When you click Alarm Buffer on the Advanced mode menu, the Alarm buffer setting menu appears. You can set in this menu to enable alarm buffer function connected with FTP Client, SMTP, Network Storage, HTTP Event, Alarm Output and so on.

  • Page 69: Motion Detection

    D5110/D5111/D7110 User Manual 7.9 Motion Detection There are three Motion Detection functions as sensors to set for different detecting zones. Each one has Threshold and Sensitivity inputs which you can adjust to specific zone sequentially. Motion Detection function can support to FTP Client, SMTP, Network Storage, HTTP Event, Alarm Output and so on.

  • Page 70: System Log

    D5110/D5111/D7110 User Manual 7.11 System Log The System Log function allows users to review any changes and events happened. The system starts logging automatically after started.  Enable Remote Log: Enables user to send the log data to a specified log server.

  • Page 71: Chapter 8. Appendix

    D5110/D5111/D7110 User Manual CHAPTER 8. APPENDIX A. Frame-rate and Bitrate Table – Help to set IPCamera with your network environment to access Internet. Base on your network upload environment to choose the suitable Image-Quality setting. For example, if the network environment is ADSL 256Kb(upload) / 2Mb(download), the most fluent Image-Quality needs to set up under 256 Kb situation.
  • Page 72 D5110/D5111/D7110 User Manual 1280*720 640*480 6144 6300 640*480 6144 6300 640*480 2048 2200 640*480 2048 2200 640*480 640*480 320*240 6144 5100 320*240 6144 3600 320*240 2048 2200 320*240 2048 2200 320*240 320*240 A.1.4. MPEG 4@ 15fps / kbps Quality 1280*1024...
  • Page 73 D5110/D5111/D7110 User Manual 640*480 2048 2200 640*480 2048 2200 640*480 640*480 320*240 6144 2200 320*240 6144 1800 320*240 2048 2200 320*240 2048 1800 320*240 320*240 A.1.7. MJPEG @ 15fps / kbps Quality 1280*1024 1280*720 640*480 320*240 Excellent 22000 16000 6000...

  • Page 74: Vga Mode

    D5110/D5111/D7110 User Manual 640*480 Medium 320*240 Excellent 2200 320*240 Excellent 1500 320*240 Good 1000 320*240 Good 320*240 Medium 320*240 Medium A.2 VGA Mode A.2.1 H.264 @ 30fps / kbps Quality 640*480 320*240 Excellent Detailed Good Standard Medium A.2.2 H.264@15 fps / kbps...
  • Page 75 D5110/D5111/D7110 User Manual A.2.4 MPEG4 @ 30fps / kbps Quality 640*480 320*240 Excellent 1000 Detailed Good Standard Medium A.2.5 MPEG4@ 15fps / kbps Quality 640*480 320*240 Excellent Detailed Good Standard Medium A.2.6 MPEG4 / kbps, fps Frame-Rate Current Image-Size Bitrate Setting...
  • Page 76 D5110/D5111/D7110 User Manual A.2.9 MJPEG / kbps, fps Frame-Rate Current Image-Size Bitrate Setting Current Bitrate Setting Frame-Rate 640*480 Excellent 13000 640*480 Excellent 7000 640*480 Good 5000 640*480 Good 2800 640*480 Medium 2500 640*480 Medium 1400 320*240 Excellent 4500 320*240 Excellent...

  • Page 77: Storage Requirement Table - Help To Set Recording Storage System

    D5110/D5111/D7110 User Manual B. Storage Requirement Table - Help to set Recording Storage System. Please refer to the following table to find out the capability for recording into your hard disk. B.1 Mega Mode B.1.1 H.264 Storage Requirement GB / channel / day @ 15fps...
  • Page 78 D5110/D5111/D7110 User Manual 320*240 6144 320*240 2048 320*240 2048 320*240 320*240 B.1.4 MPEG4 Storage Requirement GB / channel / day @ 15fps Quality 1280*1024 1280*720 640*480 320*240 Excellent Detailed Good Standard Medium 0.35 B.1.5 MPEG4 Storage Requirement GB / channel / day @ 10fps...

  • Page 79: Vga Mode

    D5110/D5111/D7110 User Manual 320*240 B.2 VGA Mode B.2.1. H.264 Storage Requirement GB / channel / day @ 30fps Quality 640*480 320*240 Excellent Detailed Good Standard 0.25 Medium B.2.2. H.264 Storage Requirement GB / channel / day @ 15fps Quality 640*480...
  • Page 80 D5110/D5111/D7110 User Manual Detailed Good Standard Medium B.2.6. MJPEG Storage Requirement GB / channel / day Frame-Rate Storage Image-Size Bitrate Setting Current Bitrate Setting Requirement 640*480 6144 6300 640*480 6144 6300 640*480 2048 2200 640*480 2048 2200 640*480 640*480 320*240...

  • Page 81: System Requirement - Help To Setup System

    D5110/D5111/D7110 User Manual C. System Requirement – Help to setup System C.1. 16 Channel IPCamera with CIF Performance Equipment Configuration Software: MainConsole Version 2.6.4 Professional CPU: Intel Core 2 Quad Q6600 @ 2400 MHz Memory: 1024 MB (2 x 512 DDR2-SDRAM )

  • Page 82: Europe - Eu Declaration Of Conformity

    D5110/D5111/D7110 User Manual Europe – EU Declaration of Conformity This device complies with the essential requirements of the R&TTE Directive 1999/5/EC. The following test methods have been applied in order to prove presumption of conformity with the essential requirements of the R&TTE Directive 1999/5/EC:...
  • Page 83 D5110/D5111/D7110 User Manual Eesti Käesolevaga kinnitab [tootja nimi = name of manufacturer] seadme [seadme tüüp = type of [Estonian] equipment] vastavust direktiivi 1999/5/EÜ põhinõuetele ja nimetatud direktiivist tulenevatele teistele asjakohastele sätetele. English Hereby, [name of manufacturer], declares that this [type of equipment] is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.
  • Page 84 D5110/D5111/D7110 User Manual Svenska Härmed intygar [företag] att denna [utrustningstyp] står I överensstämmelse med de väsentliga [Swedish] egenskapskrav och övriga relevanta bestämmelser som framgår av direktiv 1999/5/EG.

  • Page 85: Federal Communication Commission Interference Statement

    D5110/D5111/D7110 User Manual Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This manual is also suitable for:

D5111D7110

Table of Contents