Table of Contents
Advertisement
5. Getting Started
ERROR
DMD out of operating
temperature
range
Automatic shutdown is
activated
Menu 5-1
5.4 Quick Set up Adjustment
Overview
•
Quick Language Change
•
Quick Lens Adjustment
•
Quick On Screen Color change
5.4.1
Quick Language Change
What can be done?
Only if different on screen languages are available, these can be changed in quick way by following the next procedure.
How to change
1. Press ENTER to start up the adjustment mode.
2. Press the cursor key
When password protected, your password will be asked. (more explanation about access by password can be found in Chapter
'Start up the Adjustment mode'.
3. Press ENTER to display the Service mode menu.
4. Push the cursor key
display a second service menu. Select then Change Language. (menu 5-3)
5. Press ENTER to display the language selection menu.
6. Push the cursor key
Note: For the moment, only English is available.
ADJUSTMENT MODE
Select a path from below :
RANDOM ACCESS
INSTALLATION
SERVICE
Select with
or
then <ENTER>
<EXIT> to return
Menu 5-2
5.4.2
Quick Lens Adjustment
Quick zoom/focus adjustment
1. Press the Selection key *, Barco key.
The zoom/focus menu will be displayed. (image 5-3)
2. Push the cursor key
3. When finished, press EXIT key to return or ENTER to continue to the shift adjustment.
38
to highlight Service. (menu 5-2)
or
to highlight Change Language . If not visible in the menu, highlight first More and press ENTER to
or
or
to highlight the desired language. (menu 5-4)
SERVICE
IDENTIFICATION
CHANGE PASSWORD
CHANGE LANGUAGE
CHANGE PROJ. ADDRESS
SERIAL COMMUNICATION
NETWORK
LAMP
MORE...
Select with
or
then <ENTER>
<EXIT> to return
Menu 5-3
or
to zoom and
or
to focus the image.
CHANGE LANGUAGE
ENGLISH
Select with
or
then <ENTER>
<EXIT> to return
Menu 5-4
R5976333 BARCOELM R18 17092002
Advertisement
Table of Contents
