Cisco 6921 Administration Manual page 78

Telephony Features Available for the Cisco Unified IP Phone
Table 5-1 Telephony Features for the Cisco Unified IP Phone (continued)
Feature Description
Speed-dialing Dials a specified number that has been previously
stored.
Time-of-Day Routing Restricts access to specified telephony features by
time period.
Transfer Allows users to redirect connected calls from their
phones to another number.
Transfer - Direct Transfer—The first invocation of Transfer will
Transfer always initiate a new call by using the same
directory number, after putting the active call on
hold.
Direct Transfer—This transfer joins two
established calls (call is in hold or in connected
state) into one call and drops the feature initiator
from the call. Direct Transfer does not initiate a
consultation call and does not put the active call on
hold.
Voice messaging Enables callers to leave messages if calls are
system unanswered.
Cisco Unified IP Phone 6921, 6941, and 6961 Administration Guide for Cisco Unified Communications Manager 7.1 (SCCP)
5-12
Chapter 5 Configuring Features, Templates, Services, and Users
Configuration Reference
For more information refer to:
Cisco Unified Communications Manager
•
Administration Guide,
Phone Configuration"
Cisco Unified Communications Manager
•
System Guide, "Cisco Unified IP
chapter.
For more information refer to:
• Cisco Unified Communications Manager
Administration Guide,
Configuration" chapter.
• Cisco Unified Communications Manager
System Guide, "Time-of-Day
chapter.
Some JTAPI/TAPI applications are not
compatible with the Join and Direct Transfer
feature implementation on the Cisco Unified
IP Phone 6921, 6941, and 6961 and you may
need to configure the Join and Direct Transfer
Policy to disable join and direct transfer on the
same line or possibly across lines. For more
information, see the
Policy" section on page
Some JTAPI/TAPI applications are not
compatible with the Join and Direct Transfer
feature implementation on the Cisco Unified
IP Phone 6921, 6941, and 6961 and you may
need to configure the Join and Direct Transfer
Policy to disable join and direct transfer on the
same line or possibly across lines. For more
information, see the
Policy" section on page
For more information, go to the
"Understanding Directory
in the Cisco Unified Communications
Manager System Guide.
For more information refer to:
• Cisco Unified Communications Manager
Administration Guide,
Port Configuration" chapter.
Cisco Unified Communications Manager
•
System Guide, "Voice Mail Connectivity
to Cisco Unified Communications
Manager" chapter.
"Cisco Unified IP
chapter.
Phone"
"Time Period
Routing"
"Join and Direct Transfer
5-13.
"Join and Direct Transfer
5-13.
Numbers" chapter
"Cisco Voice-Mail
OL-19025-01