Assembly Instructions - Tempo Fitness T903 User Manual

Table of Contents

Advertisement

ASSEMBLY INSTRUCTIONS

TOOLS INCLUDED:
6 mm T-Wrench
5 mm L-Wrench
PARTS INCLUDED:
1 Console Assembly
2 Console Masts
2 Socket (Console Mast Scoket)
3 Hardware Bags
1 Safety Key
1 Bottle of Silicone Lubricant
1 Power Cord
PRE ASSEMBLY
UNPACKING
Place the treadmill carton on a level flat surface. It is recommended that you place a protective covering on
your floor. Take CAUTION when handling and transporting this unit. Never open box when it is on its side.
Once the banding straps have been removed, do not lift or transport this unit unless it is fully assembled
and in the upright folded position, with the lock latch secure. Unpack the unit where it will be used. The
enclosed treadmill is equipped with high-pressure shocks and may spring open if mishandled. Never grab
hold of any portion of the incline frame and attempt to lift or move the treadmill.
WARNING
DO NOT ATTEMPT TO LIFT THE TREADMILL! Do not move or lift treadmill from packaging until
specified to do so in the assembly instructions. You may remove the plastic wrap from console masts.
WARNING
FAILURE TO FOLLOW THESE INSTRUCTIONS COULD RESULT IN INJURY!
NOTE: During each assembly step, ensure that ALL nuts and bolts are in place and partially threaded in
before completely tightening any ONE bolt.
NOTE: A light application of grease may aid in the installation of hardware. Any grease, such as lithium
bike grease is recommended.
22
ASSEMBLY STEP 1
ASSEMBLY TOOLS
HARDWARE BAG 1 CONTENTS :
SOCKET BOLT (A)
SPRING WASHER (B)
FLAT WASHER (C)
55 mm
15 mm
15 mm
Qty: 8
Qty: 8
Qty: 8
LEFT CONSOLE MAST
LEFT SOCKET
FLAT WASHER (C)
SPRING WASHER (B)
SOCKET BOLT (A)
A Cut the yellow banding straps, lift the RUNNING DECK upward until the FOOT LATCH locks,
remove all contents from underneath the running deck.
B Open HARDWARE BAG 1.
C Attach the LEFT SOCKET to the LEFT CONSOLE MAST using 4 SOCKET BOLTS (A), 4
SPRING WASHERS(B), and 4 FLAT WASHER(C).
D Attach the RIGHT SOCKET to the RIGHT CONSOLE MAST using 4 SOCKET BOLTS (A). 4
SPRING WASHERS(B), and 4 FLAT WASHER(C).
RIGHT CONSOLE MAST
RIGHT SOCKET
23

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

T904T905

Table of Contents