Tempo Fitness 632T Owner's Manual page 7

ASSEMBLY STEp 3
HARdWARE bAG 3 CONTENTS :
BOLT (D) FLAT WASHER (E)
25 mm 16 mm
Qty: 2 Qty: 2
CONSOLE
ASSEMBLE
LEFT SIDE
FIRST
12
632T_OM_rev1_2.indd 12-13
Disengage the deck lock latch with your
A
foot to lower the running deck.
Open hardware bag 3.
B
gently place the console on top of the
C
console masts. Attach the left side first
using 1 bolt (d) and 1 flat washer (e).
Connect the console cables, carefully
D
tucking wires in masts to avoid damage.
Attach the right side of the console
E
using 1 bolt (d) and 1 flat washer (e).
CONSOLE CABLES
NOTE: Do not completely tighten any
step 4
screws or bolts until is complete!
FLAT WASHER (E)
NOTE: Be careful not to pinch any wires
BOLT (D)
while assembling the masts.
CONSOLE MAST
ASSEMBLY STEp 4
HARdWARE bAG 4 CONTENTS :
BOLT (H)
15 mm
Qty: 4
CONSOLE
BOLTS (H)
SUPPORT BAR
CONSOLE MAST
Open hardware bag 4.
A
Align support bar with holes in console
B
masts.
Insert bolts (h) into all 4 holes of the
C
support bar.
Note: look into holes in the right mast before
inserting bolts to avoid pinching cables.
Tighten all bolts completely.
D
4/25/11 3:44 PM
13