Table of Contents
Advertisement
4.8.1 STP Bridge Settings
This section introduces detail information of STP Bridge Settings of Web Smart Switch; the screen in
and
Table 4-26
descriptions the STP Bridge Settings Configuration of Web Smart Switch.
The page includes the following fields:
Object
• STP Mode
• Bridge Priority
• Hello Time
• Max Age
Figure 4-46 STP Bridge Settings Web Page Screen
Description
The STP mode setting. Valid values are Disable, STP & RSTP. Default
mode is Disable.
The switch with the lowest value has the highest priority and is selected
as the root. If the value is changed, the user must reboot the switch.
The value must be a multiple of 4096 according to the protocol standard
rule.
The time that controls the switch to send out the BPDU packet to check
STP current status.
Enter a value between 1 through 10.
The number of seconds a switch waits without receiving Spanning-tree
Protocol configuration messages before attempting a reconfiguration.
User's Manual of FGSW-2620CS
Figure 4-46
appears
- 62 -
Advertisement
Table of Contents
