1.4 Specification
Model
Hardware Specification
Ports
Gigabit Ports
Switch Processing Scheme
Throughput (packet per second)
Switch Fabric
Address Table
Share Data Buffer
Flow Control
Dimensions
Weight
Power Requirement
Power Consumption / Dissipation
Smart Function
System Configuration
Port Configuration
Bandwidth Control
Broadcast Storm Control
Port Statistics
VLAN
Spanning Tree Protocol
Port Trunking
Port Mirroring
QoS
MAC Address / TCP & UDP Filter
FGSW-2620CS
24 10/100Base-TX RJ-45 Auto-MDI/MDI-X interfaces
2 10/100/1000Mbps ports share with 2 SFP interfaces
Store-and-Forward
6.54Mpps@64Bytes
8.8Gbps
4K entries
2.75Mb embedded memory for packet buffers
Back pressure for half duplex, IEEE 802.3x Pause Frame for full duplex
440 x 120 x 44 mm (1U height)
1.61 kg
100~240V AC, 50-60 Hz, 0.5A
19.6 watts / 66.9BTU
Web interface, SNMP v1
Port speed duplex mode selection. Flow control disable / enable. Port
disable / enable. Port description on each port
Yes, 1 / 2 / 4 / 8 / 16 / 32 / 64Mbps
Yes, 5% / 10% / 25% / 50% / Disable
Display each port's detail Ethernet traffic counter information
26 port-based VLAN groups / 32 IEEE 802.1Q VLAN groups / MTU VLAN
STP, IEEE 802.1d (Spanning Tree Protocol)
RSTP, IEEE 802.1w (Rapid Spanning Tree Protocol)
Support 2 groups of 4-Port 10/ 100Base-TX trunk support, up to 800Mbps
bandwidth per trunk
Support 1 group of 2-Port 10/100/1000Mbps trunk support, up to 2000Mbps
bandwidth per trunk
Port mirroring allows monitoring of the traffic across any port in real time
Allow to assign low / high priority on each port.
First-In-First-Out, All-High-before-Low, Weight-Round-Robin QoS policy.
Yes
User's Manual of FGSW-2620CS
- 8 -