Table of Contents
Advertisement
Default VLANs
The Switch initially configures one VLAN, VID = 1, called "default." The factory default setting assigns all ports on the
Switch to the "default". As new VLAN are configured in Port-based mode, their respective member ports are removed
from the "default."
Base on the Switch chipset specification, the Switch supports SVL(Shared VLAN Learning) ,
all VLAN groups share the same Layer 2 learned MAC address table.
VLAN Settings
This section provides VLAN Configuration from Web Smart Switch, the screen in
describes the VLAN Configuration object of Web Smart Switch.
The page includes the following fields:
Object
• VLAN Mode
• Apply Button
Figure 4-22 VLAN Setting Web Page Screen
Description
Provide different VLAN operation mode, the available options are shown as be-
low:
No VLAN
802.1Q VLAN.
Explained in section 4.4.1.
Port Based VLAN.
MTU.
Explained in section 4.4.5.
Default mode is No VLAN.
Press this button for save current configuration of Web Smart Switch.
Table 4-11 Descriptions of the VLAN Setting Screen Objects
Figure 4-22
Explained in section 4.4.3.
User's Manual of FGSW-2620CS
appears and
Table 4-11
- 35 -
Advertisement
Table of Contents
