SGS GAS STOVES
Ember Kit Installation
CAUTION: Blocking gas ports with rock wool will result in poor light-up performance, delayed ignition,
affect flame aspect and form carbon deposit on logs.
1. Place some pieces of rock wool fibers approximately 1/2" large behind the front gas ports.
2. Light the stove. Modify the configuration of the rock wool near the gas ports until you reach the desired
effect.
Pedestal cover (model SGS and
SGS II)
1. Screw the stove on the floor using the fixation
holes each side of the pedestal;
2. Slide the pedestal cover over the pedestal from
the front;
3. Place the back cover on the pedestal cover and
secure with the supplied screws.
16