SGS GAS STOVES
Shut down Instructions
To turn the burner OFF but leave the pilot open
•
Push in and rotate the gas control knob clockwise
To turn the pilot OFF
•
Push in and rotate the gas control knob clockwise
Optional Wall Thermostat (AC05558)
Note: Use only a millivolt thermostat to prevent any permanent damage to the valve.
The optional wall thermostat will automatically keep your room at an even temperature. You need to choose a
convenient location for the thermostat. Remember that it should be at least 10 feet from the stove and away
from direct radiation of the fire. Run the correct gauge wire (see table) from the valve to the thermostat and
wire as shown in the diagram.
REMOVE THE BLUE JUMPER BETWEEN TH & TPTH SCREWS ON THE GAS VALVE. PLUG THE
THERMOSTAT WIRES (TH & TPTH).
DISTANCE
DIAMETRE
20 pi
18GA
30 pi
16GA
40 pi
14GA
50 pi
12GA
To use your SGS with the wall thermostat, follow the lighting procedure and set the gas control to the ON
position. Simply set your wall thermostat to a comfortable temperature and the stove will do the rest.
to "PILOT" position. Do not force.
to "OFF" position. Do not force.
18
l
Thermocoup