Stove Conversion For A "B-Vent" Installation Only - Drolet SGS Owner's Manual

SGS GAS STOVES

Stove conversion for a "B-Vent" installation only

The following instructions are not for a direct vent installation. Your Drolet stove is coming to you ready for a
direct vent installation. You can buy a conversion kit to be able to install it as a "B-Vent" unit. To convert your
stove, just follow the instructions:
1. Remove the decorative panels (1)
by unscrewing the two screws at
the back of the stove.
slide the panel toward the front of
the stove.
2. Unscrew and remove the two air
intake traps (2) located each side
of the stove.
decorative panel.
3. Remove the top of the stove (3)
by unscrewing the two screws at
the back of the stove. Slide the
top toward the back of the stove
to remove.
4. Clip the restrictor ring (4) into
place to bloc the air inlet.
Simply
Reinstall the
13