Pin Code; Dial Mode - Motorola O1 User Manual

u d
4. Use or to hear and select a melody. Press
m
to confirm your selection.
n
5. Press repeatedly to exit and return to standby.
6.3

PIN code

Your O1 has a security PIN code which you will need to
change some of the settings on your phone. The default PIN
code is 0000. You may want to change this to prevent
unauthorised changes to your settings.
m
1. Press to open the main menu.
u d
Setup
2. Press or until
m
.
u d
3. Press or to select
4. Enter the current 4 digit PIN code and press
5. Enter a new 4 digit PIN code and press
6. Re-enter the new PIN code and press
n
7. Press repeatedly to exit and return to standby.
NOTE
For security when you enter each digit of the PIN code it will
be displayed as a *.
24
is displayed, then press
m
Pin Code
and press
m
m
m
.
6.4

Dial mode

The dialling mode is pre-set to Tone (DTMF) dialling. If you
are using your O1 phone with an older type of switchboard/
PBX you may required to change this setting to Pulse
dialling. Contact your PBX/Switchboard provider if you are
unsure which setting to use.
m
1. Press
u
2. Press or
m
.
u
3. Press or
u d
4. Use or
m
press
.
n
5. Press
.
standby.
.
NOTE
If the dial mode is set to pulse dialling you can switch
temporarily to tone dialling for the duration of the call.
After you press to get a line, press
you enter the telephone number. The number you enter will
be dialled out using tone dialling.
to open the main menu.
d
Setup
until is displayed, then press
d
Dial Mode
to select and press .
to highlight the dial mode you want and
to confirm your selection.
repeatedly to exit and return to
<
and hold
*
before
Base settings