Base Settings; Base Ringer Volume; Base Ringer Melody; Change Base Pin Code - Motorola D401 Manual

6. Base settings

6.1

Base ringer volume

Choose from 5 volume levels or Off.
m
1. Press , scroll
m
2. Press .
u d
3. Press or to select the volume (1 - 5 or OFF).
m
4. Press to confirm or
6.2

Base ringer melody

Choose from 5 different base ringer melodies.
You will hear a sample ring as you scroll to each ringer melody.
m
1. Press , scroll
d
2. Scroll to BASE MELODY
u d
3. Press or to select the ringer melody (1 - 5).
m
4. Press to confirm or
6.3

Change base PIN code

Some functions are protected by a 4 digit PIN code which must be entered if you want to
change the settings. The default PIN is 0000. You can change this to your own preferred
number.
When you enter a PIN, the digits are shown as ****.
m
1. Press , scroll
d
2. Scroll to PIN CODE
3. Enter the 4 digit PIN code (default = 0000) and press
4. Enter the new PIN and press
5. Re-enter the new PIN and press
IMPORTANT
If you change the PIN code, please keep a record of the new number.
6.4

Dial mode

Your D4 is set to tone dialling. You should only need to change this if connected to an older
type of switchboard / PBX which requires pulse dialling.
m
1. Press , scroll
d
2. Scroll to DIAL MODE
u d
3. Press or to select
24
d
to SETUP and press
b
to return to the previous menu.
d
to SETUP and press
m
and press
b
to return to the previous menu.
d
to SETUP and press
m
and press .
m
to confirm.
m
d
to SETUP and press
m
and press
TONE DIAL or PULSE DIAL
m
. The display shows
m
.
.
m
.
m
to confirm.
m
.
.
and press
BASE VOLUME.
.
m
to confirm.
Base settings