Color Select - Runco DTV-1101 Owner's Operating Manual

Random Access Adjustment Mode

Color Select

Highlight COLOR SELECT by pushing the control disk up or down
and press ENTER to display the Color Select Menu.
ENTER continues to the Color Select Menu
EXIT will return to Internal Crosshatch Selection or Setup Pattern
Selection Menu
ADJUST returns to Operational Mode
Use the control disk to highlight a color (CRT) or combination of colors
to display the projected image in that specific color. To select a new
color, press ENTER. The Color Selection Menu will appear again on
the screen. To terminate the color select procedure, press EXIT.
ENTER continues with the selected color or color combination
EXIT returns to the Random Access Main Menu
6-6
RANDOM ACCESS
ADJUSTMENT MODE
PICTURE TUNING
GEOMETRY
CONVERGENCE
FOCUSING
COLOR SELECT
Select with or
then <ENTER>
<EXIT> to return.
COLOR SELECT
RED
GREEN
BLUE
RED AND GREEN
BLUE AND GREEN
RED AND BLUE
Select with or
<ENTER> to accept
<EXIT> to return