Table of Contents
Advertisement
Right Image Focusing
1. Push the cursor key
2. Press ENTER to start up the right image focusing.
3. Push the cursor key
4. Press ENTER to return to the focusing menu.
Blue on Source
What can be done?
After focusing the three colors, and a yellow discoloring on a normal image is
still visible, select blue on source and repeat the steps Midpoint, Top, Bottom,
Left and Right. This helps eliminate blue saturation by slightly de-focusing the
blue image.
Start Up
1. Push the cursor key
2. Press ENTER to start up.
Repeat the midpoint, top, bottom, left and right focusing.
Note: It is recommended that a white field pattern be used for this adjustment.
Color Select
What can be done?
Only one color (CRT) or a combination of colors can be turned ON or OFF.
Start Up
1. Push the cursor key
2. Press ENTER to display the color select menu (menu 2).
3. Select the desired color or color combination by pushing the cursor key
4. Press ENTER to select.
5. Exit returns to the color select menu.
RANDOM ACCESS
ADJUSTMENT MODE
PICTURE TUNING
GEOMETRY
CONVERGENCE
FOCUSING
COLOR SELECT
Select with
or
then <ENTER>
<EXIT> to return
or
to highlight 'Right' (menu 1).
or
until the right part of the image is sharp.
or
to highlight 'Blue on Source' (menu 1).
or
to highlight 'Color Select' (menu 1).
menu 1
COLOR SELECT
RED
GREEN
BLUE
RED AND GREEN
BLUE AND GREEN
RED AND BLUE
Select with
or
then <ENTER>
<EXIT> to return
menu 2
52
FOCUSING
MIDPOINT
TOP
BOTTOM
LEFT
RIGHT
Select with
then <ENTER>
<EXIT> to return
menu 1
FOCUSING
RED
GREEN
BLUE
BLUE ON SOURCE
Select with
then <ENTER>
<EXIT> to return
menu 1
or
.
or
or
Advertisement
Table of Contents
