Connecting A Component Video Source To Port 4/5 - Runco DTV-1101 Owner's Operating Manual

Connections
Connecting a Component Video Source to
Port 4/5
A component video source can be connected to the
projector via the Port 4/5. The projector detects
automatically where the sync signal is located.
To select the component video input, select component
from the source selection menu.
3-4
PORT 4/5
(
RGB + HV)
Comp/H sync V sync
. .
PORT 6 PORT 3
REMOTE
COMMUNICATION
. . .
R G B
HDTV