Table of Contents
Advertisement
8. Appendix
Specifications
Underwater Case PT-EP08
Available models
Pressure resistance
Main materials
Dimensions
Weight
Weight under water
* We reserve the right to change the external appearance and the specifications without notice.
Supplied accessories for PT-EP08
O-ring: POL-EP01
Silica gel: SILCA-5S
Body cap: PBC-EP08
Optional accessories
Silicone grease: PSOLG-3
Bracket: PTBK-E01/PTBK-E02
Underwater flash: UFL-2/UFL-1
Macro lens for underwater cases: PTMC-01 Zoom gear: PPZR-EP01/PPZR-EP02
Antireflective ring : POSR-EP01/POSR-EP02/POSR-EP03/POSR-EP05
Underwater extension adapter: PAD-EP08
* When use combining PTBK-E01 and the Case, the dedicated washers are necessary in the screw part.
If you have PTBK-E01 to which dedicated washers are not bundled, please contact to customer support
center.
EN
Waterproof lens port PPO-EP01 (optional)
Available Cases
Pressure resistance
Main materials
Dimensions
Weight
* We reserve the right to change the external appearance and the specifications without notice.
Supplied accessories for PPO-EP01 (optional)
O-ring: POL-E301
Rear port cap: PRPC-EP01
Accessories can be purchased. Products of other model types than those describing above cannot be used.
EN 23
Olympus Digital Camera E-M5
Depth of down to 45 m (147 feet)
Main body: Polycarbonate
O-rings: Silicone rubber
Width 201 mm x Height 163 mm x Depth 114 mm
1,030 g (not including lens port, camera and accessories)
Approx. –15 g (including camera, lens (14-42mm llR), zoom gear,
antireflective ring, battery and media card) (in the freshwater)
Silicone grease: PSOLG-2
Monitor hood: PFUD-EP08
Underwater optical fiber cable: PTCB-E02
Short arm: PTSA-02/PTSA-03
Macro lens adapter: PMLA-EP01
PT-EP08
Depth of down to 45 m (147 feet)
Main body: Polycarbonate
O-ring: Silicone rubber
Maximum diameter 120 mm× Depth 89 mm
Approx. 440 g (not including accessories)
Silicone grease: PSOLG-2
Front (Body) cap: PBC-EP01
Advertisement
Table of Contents
