Appendix - Olympus PT-EP10 Instruction Manual

8. Appendix

Specifications
Underwater case
Supported camera
Pressure resistance
Main materials
Dimensions
Weight
Weight under water
* We reserve the right to change the external appearance and the specifications without notice.
Supplied accessories for PT-EP10
O-ring: POL-EP03
Silicone grease: PSOLG-2
Silica gel: SILCA-5S
LCD hood: PFUD-EP05
Body cap: PBC-EP01
Diffuser: PTDP-EP05
Flash window cover: PFC-EP05
O-ring remover: PTAC-05
Optional accessories
Silicone grease: PSOLG-3
Underwater optical fiber cable: PTCB-E02
Bracket: PTBK-E01/PTBK-E02
Short arm: PTSA-02/PTSA-03
Underwater flash: UFL-2/UFL-1
Underwater macro conversion lens: PTMC-01
Macro lens adapter: PMLA-EP01
Zoom (focus) gear: PPZR-EP01/PPZR-EP02/PPZR-EP03
Antireflective ring: POSR-EP01/POSR-EP02/POSR-EP03/POSR-EP05
Balance weight: PWT-1BA/PWT-1AD
* When use combining PTBK-E01 and the Case, the dedicated washers are necessary in the screw part.
If you have PTBK-E01 to which dedicated washers are not bundled, please contact to customer support
center.
Supplied accessories can be purchased. Products of other model types than those describing above cannot be
used.
Depth of down to 45 m (147 feet)
Width 175 mm × Height 154 mm × Depth 168 mm
Approx. 1,150 g (camera not included)
Approx. –73 g (in the freshwater)
(including camera (with flash), 14-42mm IIR lens, zoom gear,
antirefletive ring, batteries, media card, diffuser, hand strap and LCD hood)
PT-EP10
E-PL5
Main body: Polycarbonate
O-ring: Silicone rubber
EN
EN 22