Appendix; Specifications - Olympus PT-EP01 Instruction Manual

8. Appendix

Specifications

Available models Olympus Digital Camera E-PL1
Pressure Depth of down to 40 m (130 feet)
resistance
Main materials Main body: Polycarbonate resin.
Tripod seat: Brass.
Axis of operation buttons: Stainless steel.
Body cap: ABS resin.
O-rings: Silicone rubber.
LCD inner hood: EPDM rubber.
LCD hood: NBR rubber.
Dimensions Width 179.0 mm x height 156.0 mm x depth 166.0 mm
Weight 1,100 g (camera and accessories not included)
Weight under –198 g (including camera, EVF, lens (14-42mm), zoom gear, antireflective ring,
water battery and media card) (in the freshwater)
* We reserve the right to change the external appearance and the specifications without notice.
Supplied accessories for PT-EP01
O-ring: POL-EP01
Silicone grease: PSOLG-2
Silica gel: SILCA-5S
LCD hood: PFUD-EP01
Body cap: PBC-EP01
Optional accessories
Silicone grease: PSOLG-3
Underwater optical fiber cable: PTCB-E02
Bracket: PTBK-E01, PTBK-E02
Short arm: PTSA-03
Underwater flash: UFL-2, UFL-1
Macro lens adapter: PMLA-EP01
Macro lens: PTMC-01
Zoom gear for 14-42mm: PPZR-EP01
Antireflective ring for 14-42mm: POSR-EP01
* When use combining PTBK-E01 and the Case, the dedicated washers are necessary in the screw part.
If you have PTBK-E01 to which dedicated washers are not bundled, please contact to customer support
center.
Accessories can be purchased. Products of other model types than those describing above cannot be used.
The Case does not correspond to any lens.
For details of the target lens, refer to Olympus website or catalogue.
En
EN 22