Installing The Digital Camera; Check The Digital Camera - Olympus PT-EP08 Instruction Manual

Underwater case

Hide thumbs Also See for PT-EP08:

Table of Contents

3. Installing the digital camera

Check the digital camera before loading it in the Case.

1. Battery Confirmation

It is impossible to change the batteries when using the Case. Make sure that you have sufficient

remaining battery capacity before use.

2. Check the remaining number of pictures

Check that the image storage medium has enough room for the number of pictures you want to take.

3. Remove the strap, lens cap and filter from the camera.

If the digital camera is loaded without removing the strap and lens cap, the Case cannot be sealed

properly and may leak.

4. Attach the zoom gear (optional) and the antireflective ring (optional).

Example of 14-42mm IIR lens

For details, refer to the instruction manual of the zoom gear and the antireflective ring.

M.ZUIKO DIGITAL ED 14-42mm

M.ZUIKO DIGITAL ED 14-42mm II/IIR

M.ZUIKO DIGITAL ED 9-18mm

M.ZUIKO DIGITAL 45mm

* If the version of the camera body is 1.2 or later, M.ZUIKO DIGITAL ED 12-50mm can be used without

using the zoom gear and anti-reflection ring. When using this lens, set the zoom ring position to "E-

ZOOM".

When the underwater mode is selected (P.17), the zoom position is fixed.

Underwater Wide-Angle: Maximum wide angle state /

Underwater Macro: Maximum telephoto state

5. Turn off the EVF.

EN 11

Antireflective ring

Zoom gear

PPZR-EP01

PPZR-EP02

–

Antireflective ring

POSR-EP01

POSR-EP03

POSR-EP02

POSR-EP03/POSR-EP05

Table of Contents