Storage; Maintenance - Stamina Total Body Cycle Owner's Manual

STORAGE

1. To store the inStride® Total Body Cycle, simply keep it in a clean dry place.
2. To move the inStride® Total Body Cycle, lift the unit by the UPRIGHT(3). Caution: Make sure that
the hub on the SUPPORT FRAME(6) has cooled before moving.

MAINTENANCE

The safety and integrity designed into the inStride® Total Body Cycle can only be maintained when the
inStride® Total Body Cycle is regularly examined for damage and wear. Special attention should be
given to the following:
1. Adjust the T KNOB(18) and verify that it functions properly and the resistance changes.
2. Verify that all nuts and bolts are present and properly tightened. Replace missing nuts and bolts.
Tighten loose nuts and bolts.
3. Verify that the CAUTION LABEL(30) is in place and easy to read. Call Stamina Products immediately
at 1-800-375-7520 for a replacement CAUTION LABEL(30) if it is missing or damaged.
4. It is the sole responsibility of the user/owner to ensure that regular maintenance is performed.
5. Worn or damaged components shall be replaced immediately or the inStride® Total Body Cycle
removed from service until repair is made.
6. Only Stamina Products supplied components shall be used to maintain/repair the inStride® Total
Body Cycle.
7. Keep your inStride® Total Body Cycle clean by wiping it off with an absorbent cloth after use.
11