ASSEMBLY INSTRUCTIONS
STEP 2
Slide the SUPPORT FRAME(6) onto the shaft on the UPRIGHT(3) and secure with BUTTON HEAD
BOLT(M8x1.25x15mm)(24) and WASHER(M8)(26). Lock the SUPPORT FRAME(6) to the UPRIGHT(3)
by inserting the LOCKING KNOB(19) through the hole in the SUPPORT FRAME(6) and screw it into the
UPRIGHT(3).
STEP 3
Screw the T KNOB(18) into the hub on the SUPPORT FRAME(6).
STEP 4
Insert the HANDLEBAR(5) into the SUPPORT FRAME(6) and secure with BUTTON HEAD
BOLTS(M8x1.25x40mm)(25), ARC WASHERS(M8)(27), and NYLOCK NUTS(M8x1.25)(28).
9