Brinkmann ALL IN ONE Owners Manual Assembly And Operating Instructions page 5

152" Cooking Grill
152" Cooking Grill
Water Pan
STEP 7:
a. Attach wooden handle halves to metal brackets
using 8-32 x w" screws and nuts as illustrated.
b. Attach two handle assemblies to side of smoker
body using 10-24 x s" screws and square nuts
as illustrated.
c. Attach the three lower support brackets (V clips)
to inside of smoker body through the three 4"
holes that are located about halfway down on
sides. Mount each bracket with notched side
facing up using 10-24 x s" screws and square
nuts. Tighten screws securely.
d. Attach the three upper support brackets (single
clips) to inside of smoker body through the three
4" holes located near the top edge. Mount each
bracket with notched side facing up using
10-24 x s" screws and square nuts. Tighten
screws securely.
Lower support bracket
(V-clip) with notched side
facing up.
Upper support bracket
with notched side
STEP 8:
a. Place water pan inside smoker body on top of
lower support brackets. Position water pan so
the rim is resting securely on notched out step
of all three support brackets. Place smoker body
on base pan.
b. Place a 152" cooking grill on the lower support
brackets directly above water pan.
c. Place a 152" cooking grill on the upper support
brackets so the rim is resting securely on
notched out step of all three support brackets.
facing up.
4