Table of Contents
Advertisement
(9)
Enter the username and password. Then click Next.
(10) Click Finish.
3.3 Configuring the PPPoA Mode
In the PPPoA mode, the HG520b uses the embedded PPP dial-up
software for dialing. The HG520b serves as a router to connect your
computer to the Internet.
This section describes the process to configure the HG520b to work in
the PPPoA mode and the process to configure your computer to
access the Internet through the HG520b.
3.3.1 Preparation
Table 3-3 shows the configuration for the PPPoA mode.
Name
VPI/VCI
Mode
Encapsulation
Username and password for the
PPPoA dial-up
3.3.2 Steps
1. Configuring the HG520b
Follow the steps described as follows:
(1)
Log in to the Web configuration page. For the procedure,
refer to "2.3 Establishing Configuration Environment."
(2)
Select Basic > WAN Setting in the navigation tree to
display the WAN configuration page.
Table 3-3 Configuration for the PPPoA mode
Configuration
Provided by the ISP
Route and PPPoA
PPPoA
Provided by the ISP
12
Hide quick links:
Advertisement
Table of Contents
