Table of Contents
Advertisement
1. Configuring the HG520b
Follow the steps:
(1)
Log in to the Web configuration page of the HG520b. For the
procedure, refer to "2.3 Establishing Configuration
Environment."
(2)
Select Basic > WAN Setting in the navigation tree to
display the WAN configuration page.
(3)
In the WAN configuration page, select the PVC that needs to
be configured.
(4)
Set Mode to Bridge. Configure relevant parameters
according to the values in the Table 3-2.
(5)
Click Submit.
2. Configuring your computer
After completing the configuration of the HG520b, you need to install
the PPP dial-up software to access the Internet.
The Windows XP (Professional) operating system has a embedded
PPPoE dial-up software. To set up a dial-up connection in Windows XP
system, do as follows:
(1)
Select
Communications > Network Connections.
(2)
Click Create a new connection in the displayed page.
(3)
Click Next in the New Connection Wizard dialog box.
(4)
Select Connect to the Internet and click Next.
(5)
Select Set up my connection manually and click Next.
(6)
Select Connect using a broadband connection that
requires a username and password and click Next.
(7)
Enter the name of the connection. You can name it as you
like. Then click Next.
(8)
Select an option from Anyone's use or My use only and
click Next.
Start
>
All
Programs
11
>
Accessories
>
Hide quick links:
Advertisement
Table of Contents
