Configuring Pppoa; Wan Setup-Summary; Configure Atm Pvc - Huawei EchoLife HG510 Home Gateway User Manual

User Manual
EchoLife HG510 Home Gateway
VI.
WAN Setup – Summery
The last page gives a summary of previous steps. Make sure that
the settings match the settings provided by ISPS, and then
Click<Save/Reboot> to complete the configuration procedure. Refer
to "3.3.2 VI. WAN Setup – Summary".

3.3.5 Configuring PPPoA

Click<Quick Setup> in the left frame, and follow the steps below
to create a PPPoA connection. The following setting steps are all the
same as PPPoE steps.
Follow the steps listed below to configure.
Stage
1

Configure ATM PVC

2 Select Connection type
3 Configure PPP username and password
4 Enable IGMP Multicast and WAN service
5 Configure LAN Service
6

WAN setup-summary

I.
Configure ATM PVC
Enter the VPI/VCI values.
Refer to "3.3.1 I. Configure ATM PVC".
Description
Huawei Technologies Proprietary
3-26
Chapter 3 Configuration Guide
I.
II.
III.
IV.
V.
VI.
See in