Table of Contents
Advertisement
Service Mode
IPoA
RFC2684B
PPPoE
Note:
ISP = Internet Service Provider
IPoA = Internet Protocol over ATM
PPPoE = PPP over Ethernet
PPPoA = PPP over ATM
Caution:
Some parameters are validated only after they are saved and the
HG520b is rebooted. Follow the prompt in the configuration page to
perform this operation.
Working Method
Take the HG520b as a router.
The HG520b uses the static
public IP address to access the
Internet.
Use the IPoA encapsulation
mode
to
encapsulate
packets.
Take the HG520b as a router.
Use the static IP address or the
IP address dynamically allocated
by the ISP.
Use
the
encapsulation
encapsulate the packets.
Take the HG520b as a router.
Use
the
embedded
dial-up software of the HG520b
for dialing.
Use the PPPoE encapsulation
mode
to
encapsulate
packets.
9
Refer to 3.4
"Configuring
the IPoA
Mode."
the
Refer to 3.5
"Configuring
the RFC2684B
IPoE/IPoA
Mode."
mode
to
PPPoE
Refer to 3.6
"Configuring
the PPPoE
mode."
the
Configuration
Hide quick links:
Advertisement
Table of Contents
