Chapter 4 Other Settings
4.1 Changing the IP Address of the LAN of the
HG520b
You can access the Web configuration page of the HG520b through
the IP address of the LAN of the HG520b. The IP address of the LAN of
the HG520b is configured by default, you can change it as follows:
(1)
Log in to the Web configuration page of the HG520b. For the
procedure, refer to "2.3
Environment."
(2)
Select Basic > LAN Setting in the navigation tree to display
the LAN Setting configuration page.
(3)
Enter the IP address and the subnet mask in this page.
(4)
Click Submit.
Note:
You need to log in again to use the Web configuration page after
configuring the IP address of the HG520b.
Ensure that the IP address of the computer and the IP address of
the HG520b are in the same network segment, then you can access
the Web configuration page.
4.2 Changing the Administrator Password
The Web manager of the HG520b provides the password protection
function to prevent illegal users from changing the configuration of the
HG520b. The username and the password of the HG520b are
Establishing Configuration
17