IDVIEW IV-110CD-SN Installation And Operating Manual page 23

4.2.3 Alarm Recording
Take the following steps to activate the programmed alarm recording. For ALM OPERATION,
REC RATE, REC QUALITY, AUDIO, ALM TYPE, ALM DURATION, and PRE-ALARM settings,
please refer to section 5.2 for more details.
(1) Press the Setup button
(2) Select ALARM and press the Enter button
(3) Set the desired REC RATE, REC QUALITY, ALM TYPE, and ALM DURATION for use. If audio
is required, set AUDIO to ON. If pre-alarm recording is required, set PRE-ALARM to ON.
(4) To activate the alarm recording, set ALM OPERATION to ON. To deactivate it, set ALM
OPERATION to OFF.
MAIN MENU
RECORD
ALARM
CLOCK / TIMER
COMMUNICATION
DISK
SYSTEM
GOTO ALARM PAGE
(5) To active the motion alarm recording, Select MOTION SETTING and press the Enter button
to enter the MOTION SETTING PAGE, set MOTION ENABLE TO ON, and set a suitable
sensitivity according to the video sources.
ALARM SETTING
ALM OPERATION
REC RATE
REC QUALITY
AUDIO
ALM TYPE
ALM DURATION
PRE- ALARM
MOTION SETTING
MAIN PAGE
ALARM REC ENABLE
4.2.4 Externally triggered Recording
By connecting the RECORD IN of ALARM I/O on the rear panel of the DVR, you can
activate/deactivate the recording function of a DVR. The file will be kept with a prefixed "R".
Please refer to section 2.3 for more details.
to enter the MAIN MENU.
: OFF
: 20F/S
: BEST
: OFF
: NO
: 0 SEC
: OFF
21
to enter the ALARM SETTING.
ALARM SETTING
ALM OPERATION
REC RATE
REC QUALITY
AUDIO
ALM TYPE
ALM DURATION
PRE- ALARM
MOTION SETTING
MAIN PAGE
ALARM REC ENABLE
MOTION SETTING
MOTION ENABLE
SENSITIVITY
REGION
MAIN PAGE
SET MOTION DETECTION
: OFF
: 20F/S
: BEST
: OFF
: NO
: 0 SEC
: OFF
: ON
: 3
: SET