Table of Contents
Advertisement
Physical specification for Ethernet
Wire Type
Connector Type
Max. Cable Length
Hub Wiring Configuration
PC Wiring Configuration
NOTE: For more details on network connections, please refer to the following document.
10.1.2 Install the Network Viewer in your PC
Install the Network Viewer from the supported CD-R.
1. Exit all applications currently running in the selected PC.
2. Insert the supported CD in the CD-ROM drive. The program will execute the installation automatically.
Follow the on-screen instructions to proceed with the rest of the installation procedure as they appear.
3. After the installation is complete, pop up the START menu from your computer, and point to Programs
/ Network Viewer to open up the program selection page as shown below. Click the Network Viewer
tag to start the Network Viewer program.
Install the Network Viewer for the ZIP file.
1. Save the ZIP file to your PC and extract the file to a designated directory.
2. Open the extracted folder (DVR). The folder contains 5 files.
3. Click on the
proceed with the rest of the installation procedure as they appear.
4. After the installation is complete, pop up the START menu from your computer, and point to Programs
/ Network Viewer to start the Network Viewer program.
NOTE: Please make sure the TCP/IP communication software has been properly set and configured
in your computer. To check your TCP/IP settings, refer to the following document.
Cat. 5
RJ-45
30 m
Straight Through
Cross Over
icon to execute the installation and then follow the on-screen instructions to
57
Advertisement
Table of Contents
