IDVIEW IV-110CD-SN Installation And Operating Manual page 71

12.2.2 Enable DHCP Function
^
Use the "
Enter button to proceed.
MAIN MENU
RECORD
ALARM
CLOCK / TIMER
COMMUNICATION
DISK
SYSTEM
GOTO COMM PAGE
NOTE: This function can only work if the LAN which the unit is connected to has a DHCP server. If the
DHCP server is working, the DVR will obtain an IP address automatically from the DHCP server.
In that case please skip the section 2.3 (Set IP address) and follow section 3. (TCP/IP
Communication Software).
12.2.3 Set IP Address
You don't need to set a NET IP for the unit if the LAN which the unit is connected to has a DHCP server.
Otherwise, please follow the instructions given below:
MAIN MENU
RECORD
ALARM
CLOCK / TIMER
COMMUNICATION
DISK
SYSTEM
GOTO COMM PAGE
^
Use the " " and "v" buttons
NET IP page
Set the IP, MASK and GATEWAY. Then press the Enter button to proceed. The following is a
sample setting.
IP:
MASK:
GATEWAY:
" and "v" buttons , and
, and , to highlight the NET IP. Press the Enter button to enter the
192.168.0.1
255.255.255.0
0.0.0.0
, to highlight NET DHCP; select ON. Then press the
COMM SETTING
COMM ID
RS232
RS485
NET ENABLE
NET DHCP
NET IP
FTP SETTING
MAIN PAGE
SET ETHERNET DHCP
COMM SETTING
COMM ID
RS232
RS485
NET ENABLE
NET DHCP
NET IP
FTP SETTING
MAIN PAGE
SET ETHERNET
69
: 01
: ON
: ON
: ON
: ON
: SET
: 01
: ON
: ON
: ON
: ON
: SET