Table of Contents
Advertisement
10.1.3 View the IV-110CD-SN video from a remote PC
1. Click the Find tag to connection of the all DVR device in the LAN.
2. Choose a channel number from the Channel drop-down list.
3. Type in the user name: admin (it only accept user name as admin), and password: same as the
chosen IV-110CD-SN (4-digit no., which you set in the DVR unit).
4. Click the Modify tag to check the data in the Device List.
5. Please repeat steps 2 to 4 again for another desire.
6. Click the Connect tag to establish the connection between the devices and the computer. Click the
Login tag to begin viewing images.
NOTE: Upon connection, the connection status box indicates the name and IP address of the selected
device. If there's a failure to connect, a "Fail" message appears on the screen right after the
device IP address; otherwise an "OK" appears. To add more connections or units to the
IV-110CD-SN, please repeat the above instructions.
Once Network View is executed a Login prompt will
appear, you must enter the default User Name:
admin, password: 9999 into the respective field and
click on OK to log into the application.
Follow the instructions below to use the Network
Viewer to browse a IV-110CD-SN video from a
remote location. Upon entering the Network Viewer,
the connection box will appear as follows.
58
Advertisement
Table of Contents
