Table of Contents
Advertisement
WARNING
To avoid electrical shock which can cause
severe personal injury or death, green
ground wire must remain attached to wire
connectors.
4.
Electronic Control and Crystal Choice
Dispenser Models
Unplug top hinge wire connectors.
5.
Remove top hinge screws then top hinges.
6.
Remove doors by lifting doors off bottom hinges.
7.
Rehang doors by reversing steps 1-6.
Aligning Doors and Leveling Refrigerator
1.
Check alignment of doors at top center.
2.
If doors are not aligned, remove toe grille by
pulling forward. Turn leveling screw clockwise to
raise door or counterclockwise to lower door.
Leveling screw for refrigerator door is on right
side. Leveling screw for freezer door is on
left side.
3.
Open and close both doors completely to confirm
doors are aligned.
Important
When doors are aligned, refrigerator is level
side-to-side. If refrigerator cannot be level due to
flooring, use shims under roller(s) to level refrigerator.
Models have both front and rear leveling legs.
4.
If necessary, replace toe grille by inserting clips
in holes and snapping in. Top of toe grille is
indicated on back of toe grille.
Rear Leveling Screw
Front Leveling Screw
6
Advertisement
Table of Contents
