Amana ModernMaid Owner's Manual page 12

Side-by-side
Table of Contents

Advertisement

Entry Tone
Entry tone indicates a pad was pressed and command
was read and accepted.
Deactivate entry tone by pressing and holding * pad for
three to five seconds. Three short beeps indicate
instructions were accepted. Repeat above to activate
entry tone.
Door Open Alarm
Door open alarm sounds and indicator light blinks if
either door is open for more than three minutes.
Deactivate door open alarm by pressing Alarm Off pad
or by closing either door. Activate door open alarm by
pressing * pad then holding Alarm Off pad for three to
five seconds. Three short beeps will sound. Repeat
above to deactivate door open alarm indefinitely.
High Temperature Alarm
High temperature alarm sounds and indicator light
glows if refrigerator or freezer temperature is high for
two hours. A blinking light signals affected
compartment. Deactivate high temperature alarm by
pressing Alarm Off pad. Alarm discontinues when
proper temperature is reached.
Thermistor Alarm
Thermistor electronically senses refrigerator and
freezer temperatures. Thermistor alarm sounds and
indicator lights scroll if refrigerator or freezer thermistor
is not operating properly. Deactivate display by
pressing Alarm Off pad.
If thermistor alarm sounds, contact an authorized
servicer immediately. If Alarm Off pad is pressed,
thermistor control retests to confirm situation has been
corrected. Alarm sounds again if thermistor is still not
operating properly.
Display Lights
Deactivate temperature display lights by pressing * pad
then pressing Display Off pad. Activate temperature
display lights by pressing any of top five pads.
Clean Condenser Coil Light
Clean condenser coil light glows every three months as
a reminder to clean condenser coil. Light
automatically cancels in 72 hours. Deactivate clean
condenser coil light before automatic reset by pressing
Alarm Off pad.
12

Advertisement

Table of Contents
loading

Table of Contents