The remaining options, "Set Time on Publish", "Auto-Clean Unit
on Publish", and "Print Dymo Label at Publish Time" are
reserved for future expansion and are not currently used.
Depending on the way each VIP unit is connected, there are
different ways to set up each site description, depending on how
you want to publish your files to the VIP unit.
Click on the "Connection Method" tab and then select one of the
following four types: (Some versions of VIP Composer may
show fewer types, depending on the options you purchased.)
"Floppy" Sites
"Serial" Sites
48
The "Floppy" publish
method is for VIP units that
are not connected to your PC
via serial cable, modem, or
Ethernet networking.
At publish time, you will be
prompted to insert a floppy
disk, and the pages for your
project will be automatically
copied to that disk.
The "Serial" publish method
is for VIP units connected
directly to your PC via a
serial cable. Select the
"COM" port that
corresponds with the cable
connection.
At publish time, VIP
Composer will automatically
connect with the VIP unit
and send over the pages of
your project.
VIP User Manual