Reset
Use this menu if you want to reset all of the preferences settings back
to the factory defaults.
Do NOT use this menu to reboot the unit. Just use the Power ( )
button on the remote. Using this menu will lose any of your
changes to the preferences settings.
Upgrade
Future upgrades to the software inside the VIP unit, if applicable,
will be available on floppy disk. When you insert an upgrade disk,
the unit will automatically detect it and ask you if you want to
perform the upgrade (see later in this chapter).
However, if the automatic detection does not work for some reason,
or if you wish to downgrade to a previous version, you can use this
menu option to force the upgrade process to occur.
Password
This menu is for future expansion. Right now this menu will only
report "No remote-access password currently set".
Network Setup
VIP "Express" models feature support for Ethernet networking.
Ethernet networking can be a complex subject. If you are
not familiar with the meaning and implementation of
terms like "TCP/IP", "IP Address", "Subnet Mask", etc.,
then it is recommended that you have your network
administrator assist you with these menus.
32
VIP User Manual