Set The Gateway; The "Domain" Menu; Verifying The Network Setup - MagicBox VIP User Manual

Use the up/down arrows on the remote control to adjust the
digital display. Select the Subnet value that matches the one
used on your network. (This value is provided by your
network administrator.)
It is important that the Subnet match the Subnet of your
network, or communication with the VIP unit may not work.
When you are finished, select the "Set" button. You will be
returned to the Setup Screen.

Set the Gateway

From the Setup Screen, select "Network" and then select
"Gateway". The following display should appear:
If you are installing the VIP Express unit behind a router, the
router address must be entered in the Gateway setting
before the VIP will talk across the router.

The "Domain" Menu

As with the Gateway setting, this setting is required if your
VIP Express unit is behind a router. Enter the address of
your Domain Server here.

Verifying the Network Setup

Once the VIP unit's networking hardware has been installed and its
settings have been configured, your Network Administrator should
verify that the network is operating properly.
The Network Adapter on the back of the VIP unit should have it's
power light on. (The "Xircom"-style adapter will not show a power
light until it has been properly configured.)
VIP User Manual 35