Using The Remote Control; Remote Control Buttons; Power; Play - MagicBox VIP User Manual

Using the Remote Control

Power -

This button will enter and exit the VIP unit's sleep mode.
If the VIP unit is on, press the Power ( ) button to make the unit go
to sleep. The display will go blank and the power light will turn off.
It is only necessary to press this button once – there may be a delay
before the unit goes to sleep.
If the VIP unit is off, press the Power ( ) button to wake up the unit.
The unit will display the main menu screen, and then if there is a
disk inserted it will automatically begin loading pages.

Play -

This will cause the unit to enter playback mode. Normally, the unit
will automatically begin playing pages after it has loaded them.
However, if you have accessed other menus using the remote, you
will need to press play for the unit to resume.
VIP User Manual
The VIP unit's functions are accessed using the
included infrared remote control.
If you intend to use the VIP unit purely as an automatic
playback device, you will not need the remote control
after you have set things up the way you like. Store the
remote in a safe place where it will not be lost, and
where you will be able to find it easily again should
you need to change a VIP setting later.
At the top of the remote control is an activity light.
This light will blink every time you press a button on
the remote. If you do not see the activity light blink,
then check to be sure that fresh batteries are installed in
the unit, and that the batteries are oriented in the
proper direction.

Remote Control Buttons

23