If you are upgrading an older unit into an "Express" unit
using the provided upgrade disk, perform the upgrade
before accessing the setup menus. Perform the steps under
"Updating the Unit's Software" later in this chapter, then
return to this section.
All network settings are
adjusted by selecting the
"Network" menu from
the setup screen:
Select a Network Adapter Type
From the Setup Screen, select the "Network" menu and then
select "Adapter". The following menu will appear:
Several Ethernet Adapter types are available for the VIP.
Note the name on the Ethernet Adapter. It will correspond
to the correct menu item. Two adapters: GVC and MagicBox
1 are supported, but not pictured.
VIP User Manual
33