"Xircom" Adapter
"Silicom" Adapter
⌧
When connecting the adapter to the VIP's parallel port,
ensure that the power cord to the VIP unit is unplugged in
order to prevent damage. After connecting the adapter, first
connect the adapter's own power supply cable, then connect
the VIP's power cable.
The "Xircom"-style adapter's power light may not appear
until after the unit has been selected in the menu. This is a
normal feature of the adapter.
Select the proper adapter type using the remote control. You
will then be returned to the Setup Screen.
Set the Network Address
From the Setup Screen, select "Network" and then select
"TCP/IP". The following display should appear:
Using the up/down arrows on the remote control, adjust the
digital display to match the IP address you want to assign to
your VIP system. (This address is provided by your
network administrator.) When you are finished, select the
"Set" button. You will be returned to the Setup Screen.
Set the Subnet Mask
From the Setup Screen, select "Network" and then select
"Subnet". The following display should appear:
34
VIP User Manual