Grizzly G0690 Owner's Manual page 61

T10222—Router Table Attachment
T10223—Sliding Table Attachment
accessorize your g0690 or g0691 Cabinet table
saw with either of these attachments for the ulti-
mate in table saw functionality.
T10223
Figure 95. t10222-23 sliding table & router
table attachments.
Forrest Woodworker II Saw Blades
T20778—10", 20 Teeth
T20779—10", 40 Teeth
T23527—10", 48 Teeth
hailed as the Cadillac of all blades, Forrest saw
blades have become legendary for their ability to
leave highly polished, finish ready surfaces on
nearly everything they cut. Made in usa.
With this all purpose blade for table saws you can
rip and crosscut 1" 2" rockhards and softwoods
resulting in a smooth as sanded surface. With
20° face hook, ply veneers will crosscut with no
bottom splinter at moderate feed rates. double
hard and 40% stronger C4 carbide will give up
to 300% longer life between sharpenings. Ends
blade changing (one blade does rip, combo and
crosscut), second-step finishing and cutting
oversize to allow for resurfacing. Buy and sharpen
one blade instead of 3 (24t rip, 50t combination
and 80t crosscut). ⁄ " arbor,
5
8
Figure 96. Forrest Woodworker ii saw Blade.
Model g0690/g0691 (Mfg. 11/10+)
T10222
⁄ "
1
16
⁄ " kerf.
1
8
Forrest Dado Blades
h4756— 8", 24 Teeth, 1/4"–29/32" Groove
T23267—8", 24 Teeth, 3/16"–1/4" Groove
the world's finest dado head cleancuts all your
grooves! No splintering when cross-cutting oak,
ply veneers and melamine. perfect for flat-bot-
tomed grooves. No staggered steps or round
bottoms like a wobble-dado leaves! Cuts in all
directions - rip, cross-cut, miter, any depth. Cuts
all sized grooves ⁄ " through
1
4
super-hard carbide gives up to 300% longer
life, especially good on plywoods and abrasive
particle-boards. ⁄ " arbor.
5
8
Figure 97. h4756 dado head.
G1163—1hp Floor Model Dust Collector
G0710—1hp Wall-Mount Dust Collector
G3591—30 Micron Replacement Bag
h4340—3.0 Micron upgrade Bag
Excellent point-of-use dust collectors that can
be used next to the machine with only a small
amount of ducting. specifications: 450 CFM, 7.2"
static pressure, 2 cubic foot bag, and 30 micron
filter. Motor is 1hp, 110V/220V, 14a/7a.
Model g0710
Model g1163
Figure 98. point-of-use dust collectors.
⁄ " increments.
29
32
-59-