Nokia A032 Getting Started Manual page 37

Special modes
Note: The Nokia A032
has no integral power
switch – switch on
and off at the wall
outlet or by removing
the power connector
from the rear of the
unit.
30
Displaying the number of users
While in Normal mode, press and hold in the
button. The
mode
number of wireless
symbols applies.
For example, if the
there are between 4 and 7 stations associated
with the Access Point.
Use the button to start in special modes:
mode
• Learn mode – Use this to perform initial
configuration on your Access Point, as
described in Setting up and testing on
page 17.
• BIOS mode – Use this to load new
firmware. See the Upgrading in the
Advanced User Guide for more details.
Starting in Learn mode
To start in Learn mode:
1 Switch off the unit.
2 Press and hold the
switching on again.
3 Release the
mode
the LEDs go off.
info
The unit should then follow what appears to be
a normal initialization sequence. However, at
the end of the sequence the
display a 'chasing' pattern in which one LED
rapidly circulates around the panel.
LEDs now display the
info
– the lower row of
users
, and LEDs are lit,
1+ 2+ 4+
button while
mode
button one second after all
LEDs will
info
Nokia A032 Getting Started