Setting Up And Testing - Nokia A032 Getting Started Manual

3. Setting up and testing

Learn mode is a
special mode of
operation – it is a
convenient way you
can configure the
Nokia A032 in its
factory default state.
You can also use a
serial cable – this is
explained in the
Advanced User Guide.
If you want to use
Learn mode from a
wired LAN station, see
page 31.
Setting up and testing
This chapter explains how to switch on the
Nokia A032 and configure its TCP/IP and WEP
settings.
You can get up and running very quickly by
configuring your Nokia A032 from a wireless
station, using a standard Web browser interface
(this does not require an external Internet
connection) and by setting the Nokia A032 into
Learn mode.
If you don't set up TCP/IP, you will only ever be
able to configure your Nokia A032 using Learn
mode, as described in this chapter, or via the
serial port (as described in the Advanced User
Guide); assigning the Nokia A032 an IP address
will enable you to use any of the methods
described in the Advanced User Guide to
configure the Nokia A032 from suitably
privileged wired and wireless LAN stations.
You'll need to:
• Establish a connection with the Nokia A032
from a wireless station.
• Make some simple configuration changes.
17